• О компании
• Контактная информация

+7 (495) 507-20-82

Алмазный инструмент:

• Фрезы концевые ⁸⁵
  • — Пальчиковые индустриальные ³⁹
  • — Пальчиковые экономичные ²¹
  • — Пазовальные ²⁵
  • — Профильные
• Фрезы насадные
• Пилы алмазные ¹¹
• Заточка и ремонт алмазного инструмента

Твердосплавный инструмент:

• Фрезы концевые
  • — Фрезы насадные
• Пилы дисковые ²⁴⁶
  • — Универсальные ⁸³
  • — Для раскроечных центров ¹²²
  • — Для лесопиления ²⁷
  • — Для алюминия ¹⁴
• Сверла ⁷²
• Ножи сменные ¹³⁰
• Рейсмусные ножи и бланкеты ⁹¹

Оборудование:

• Сушильные камеры
• Обрабатывающие центры

Обрабатывающие центры: Conquest 3200/4200/5200/6200

Conquest 3200 represents the perfect combination between a CNC router, with its solidity and accuracy, and a point-to-point machine, as far as speed and flexibility are concerned. One of the main characteristics of this machine is the open frame (cantilever), which allows to load and to unload pieces of big size very easily. Moreover there is the possibility to equip the machine either with a canalized bakelite table or a set of movable bars and vacuum cups. In both cases, the panel working tickness is 300 mm. This machine is equipped with an 8 kW electrospindle and two automatic tool changers: a transported one, carousel type with 8 positions, and an auxiliary one, located on the frame column, with 2 or 4 positions, where all angular aggregates available on the market can be mounted.

The variety of configurations of this machine permits to meet any special Customer'srequirement. Together with the main electrospindle you can have an independent boring unit (13 independent vertical spindles, 4 horizontal spindles on the x-axis and 2 on the y-axis), a 2,2 Kw orientable unit for horizontal routing with one or two outlets, an orientable sawing unit up to 7,5 Kw with one or two outlets or as an alternative a second electrospindle with tool changer. On request the electrospindle can be equipped with a rotating axis. This machine is equipped with an electrical cabinet fitted out with an OSAI series 10 numerical controller, Windows interface and hand held pendant.

Conquest 3200/4200/5200/6200/7200/8200 with movable bar working table and matrix table

Conquest 3200/4200/5200/6200 4 axis configuration

Conquest 3200/4200/5200/6200 5 axis configuration

Conquest 3200/4200/5200/6200 rider

Conquest 3200/4200/5200/6200 rider

CNC with built-in PC and relevant Windows system, allowing the application of CAD-CAM directly on the machine

Mobile bar worktable with sliding suction cups

Extreme flexibility in combinating operating units

Adjustable dust extraction hood, CNC controlled, for 5 axis system

Wide range of standard and special aggregates

Automatic tool changer 8 positions

Auxiliary 4/12/20 position tool changer

Examples of vacuum cups positioning

The rotor axis, which can be mount on the electrospindle also later on, allows continuous aggregate rotation of 360°

Floating unit

Electrospindle with air or liquid cooling system

Conquest 3200

Conquest 4200

Conquest 5200

Conquest 6200

The factory reserves to make technical and constructive modifications without notice. Machines in compliance with CE standard 89/392 and following, for the countries these are in force in.